QRZ! Ham Radio 3/QRZ Ham Radio Callsign Database - Volume 3.iso/digests/infoham/931487.txt

Internet Message Format | 1994-06-04 | 25.5 KB

Date: Mon, 20 Dec 93 22:03:28 PST
From: Info-Hams Mailing List and Newsgroup <[e-mail]>
Errors-To: [e-mail]
Reply-To: [e-mail]
Precedence: Bulk
Subject: Info-Hams Digest V93 #1487
To: Info-Hams


Info-Hams Digest            Mon, 20 Dec 93       Volume 93 : Issue 1487

Today's Topics:
                  ARRL Standard 12V Power Connector?
                             Icom IC-707?
                    I was a "young" enthusiast...
              Mods to use AMTOR/PACTOR on Atlas HF rigs?
                     Morse Code program for UNIX
                           Ni-Cd questions
                   Order Pizza by Internet (2 msgs)
                   Portable Repeater Help (2 msgs)
                      Reference for xmit tubes?
                     Returned mail: User unknown
                 Where are all the young enthusiasts?

Send Replies or notes for publication to: <[e-mail]>
Send subscription requests to: <[e-mail]>
Problems you can't solve otherwise to [e-mail].

Archives of past issues of the Info-Hams Digest are available
(by FTP only) from UCSD.Edu in directory "mailarchives/info-hams".

We trust that readers are intelligent enough to realize that all text
herein consists of personal comments and does not represent the official
policies or positions of any party.  Your mileage may vary.  So there.
----------------------------------------------------------------------

Date: Mon, 20 Dec 1993 15:35:39 GMT
From: pacbell.com!sgiblab!sgigate.sgi.com!olivea!news.bu.edu!att-in!cbnews![e-mail]
Subject: ARRL Standard 12V Power Connector?
To: [e-mail]

Can someone please tell me exactly what type of connector is considered the
"ARRL Standard 12V Power Connector"?  Thanks.
--
   Wally Blackburn     Clinton-Gore - Socialist Leadership
   [e-mail]             for the 90s!
   Amateur Radio Station AA8DX    I'm the NRA.
      *More people have died in Ted Kennedy's car than from my gun!*

------------------------------

Date: 20 Dec 1993 15:53:22 GMT
From: pacbell.com!sgiblab!swrinde!gatech!howland.reston.ans.net!vixen.cso.uiuc.edu!bradley.bradley.edu!augustana.edu![e-mail]
Subject: Icom IC-707?
To: [e-mail]

Anyone have or reviewed Icom's new 707 radio?  What's the
price?  Specs?

Curious...... Kevin, KB9IUA

* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
Kevin L. Anderson,     Geography Dept.,     Augustana College
Rock Island, Illinois   61201   USA     phone: [phone]
e-mail: [e-mail]  or [e-mail]
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *

------------------------------

Date: 20 Dec 1993 08:00:55 -0700
From: orca.es.com!cnn.sim.es.com!moons.sim.es.com![e-mail]
Subject: I was a "young" enthusiast...
To: [e-mail]

I am too, sort of. I am 33, and have been licensed since 1983. I was
enthusiastic at one time, got my Extra, got lots of equipment, but also
have a family and a job. I would love to experiment with digital modes
at 902, but I have to be content to make the multi-DSP card work before
Christmas. Besides, I get paid for making the card work so I may be
able to buy radio "goodies".

I have been interested in radio since the next door neighbor messed up
Saturday morning cartoons. He helped develop "tele-text" systems for
broadcast TV. He also went "silent-key" last year, thanks to cancer.
My other mentors and Elmers have also either left radio or died.

There are some hams still on the leading edge, likes of Phil Karn and
Cliff Stoll. They are doing ham radio, but also good work on the edge
of communications and computer security. Some others are up there, too.
(Sorry, don't know all of your names.)

Keep posting, your ideas may help bring the dream of others to life.

--
Douglas L. Datwyler, WR7O
Evans & Sutherland Computer Corp.
preferred e-mail: [e-mail]

------------------------------

Date: Sat, 18 Dec 1993 19:28:29 GMT
From: pacbell.com!sgiblab!sdd.hp.com!elroy.jpl.nasa.gov!usc!howland.reston.ans.net!cs.utexas.edu!halley!integrity![e-mail]
Subject: Mods to use AMTOR/PACTOR on Atlas HF rigs?
To: [e-mail]

       All,
    I'm in the process of trying to get on AMTOR (and hopefully
       PACTOR once I get the FW upgrade from MFJ) and have had problems
       while using an Atlas 350 (or 210). I can't seem to link up with any
       stations on 20 while they're calling CQ (FEC B). I suspect it's the
       AGC timing of the Atlas (which is not externally defeatable). Can
       someone tell me if this is common on old rigs due to their slow
       response time?
       (BTW, I have no problem copying mode "A" or "B" transmissions in
       "monitoring" mode, using an MFJ-1278 TNC, running rev 3.3 FW)
       Thanks

--
| Bruce Sawtelle           AX.25     : W3NJ @ N5LJF.TX.USA.NA           |
|   Tandem Computers, Inc. Internet  : bruces @ mpd.tandem.com          |
|   14231 Tandem Blvd.     USENET    : halley!bruces                    |
|   Austin, Tx  78728      TCP/IP    : 44.76.1.42 (w3nj.ampr.org)       |

------------------------------

Date: 19 Dec 1993 23:53:09 GMT
From: sdd.hp.com!vixen.cso.uiuc.edu!howland.reston.ans.net!gatech!usenet.ufl.edu!mailer.acns.fsu.edu!freenet2.scri.fsu.edu![e-mail]
Subject: Morse Code program for UNIX
To: [e-mail]

I was looking through the GOPHER a little while ago and came up with
post where someone has made a MORSE CODE program that runs on UNIX
boxes and its location.

Its located at HANAUMA.STANFORD.EDU <36.51.0.16> morse.shar is the
file name

I have never seen this posted before and according to the post ITS FREE
shareware.

Tim Wright KD4OVM
--

------------------------------

Date: 21 Dec 93 01:54:09 GMT
From: ogicse!emory!kd4nc!ke4zv![e-mail]
Subject: Ni-Cd questions
To: [e-mail]

In article <[e-mail]> [e-mail] (Milt Sanders) writes:
>In article <[e-mail]>,
>[e-mail] wrote:
>> Need some input on rechargeables,
>> 1. Should I store them Ni-Cd charged or drained?
>> 2. Should I discharge them after a period of storage and then
>> recharge them to full ? If they needed to be stored charged.
>
>I recommend charging them prior to storage, especially if they are in a
>pack.  Single cells are OK to store either way.  In fact individual cells
>which I purchase are usually pretty dead.  I use many 4-cell and 8-cell
>packs with my radio control airplanes.  I normally charge them when stored
>for the winter, then if I think about it, charge them at least once every
>three months.  I also have a battery cycler that I use, especially in the
>spring before I put the batteries back into normal use.  I will usually
>charge them up and then run them through the battery cycler to determine
>existing capacity (I get a direct milliamp hour capacity readout), charge
>them up again and go fly.  If the capacity is less than 60% of rated, I
>cycle them a couple of times.  If they don't come up, they get thrown away.

>I would not store a pack dead or near dead, because weaker batteries can be
>reverse charged by stronger ones (at lest as long as there is some closed
>circuit that keeps memory going or something else).

Milt's advice is good. The manufacturer's advice for long term storage
of NiCd cells is to store them *individually* totally discharged. No
chemical activity takes place in a totally discharged cell, so they
shouldn't be harmed by long storage. However, if the cells are connected
in a pack, then follow what Milt said. You can get a reversed cell as the
pack self-discharges in storage. There's always some leakage current in a
pack even if it isn't hooked to a load. Recharging every couple of months
should keep the pack alive during storage, but of course you're eating
up cell life by cycling them.

Gary
--
Gary Coffman KE4ZV          | I kill you,             | gatech!wa4mei!ke4zv!gary
Destructive Testing Systems | You kill me,            | uunet!rsiatl!ke4zv!gary
534 Shannon Way             | We're the Manson Family | emory!kd4nc!ke4zv!gary
Lawrenceville, GA 30244     |         -sorry Barney   |

------------------------------

Date: Mon, 20 Dec 93 00:11:27 GMT
From: sdd.hp.com!elroy.jpl.nasa.gov!usc!howland.reston.ans.net!newsserver.jvnc.net!a3bee2.radnet.com!cyphyn![e-mail]
Subject: Order Pizza by Internet
To: [e-mail]

Jack Hamilton ([e-mail]) wrote:
: [e-mail] (Randy) wrote:
: >Ham thats getting his/her mail via Packet..... because I-net is viewed as
: >'commercial traffic' !
:
: I don't think the commercial aspect of it is what's important.
:
: [...]

Ok.. maybe not...

:
: >Hey! wait a minute! There are ticketed Hams here! Whats going on?
:
: Let's say I send clearly commercial mail from my Internet account to you on
: your packet account.  Who has violated a rule?  Maybe me, but certainly the
: gateway operator.  Why should gateways take that risk, or take the time to
: read every message that goes through?
:
: [...]

well then, I guess any ham who comes in by packet, is gonna be missing a lot
e-mail then.

:
: >So...somewhere, someone has to make clear what traffic is to pass, make it
: >uniform everywhere, so that everyone can set up accordingly to jive with the
: >system...which ever it's going to be:
:
: "has to"?  Who says?
:
: [...]

 If it' s  going to be where Packet Hams seeking Email replys, are going to
get those Email replys, ya can't just SORT OF look into it!
===

:
: >* obviously, the sent-text would have to be as per the rules about by & for
: >  Amateur perposes only
:
: And that's the problem.  Gateway operators don't know.  It's not clear, I
: think, whether I would have violated FCC rules if I sent you an illegal
: message originated in the Internet.  What if I thought it was going to an
: Internet account but you had set up an auto-forward file to packet?  What
: if a non-ham sent such a message?  They don't have a license with terms to
: violate.
:
: --

Ok, I see yer point..  Then I guess we ought to warn Packet Hams to not
seek Email replys.....

Too many I've seen in here, keep asking 'please send Email!'  ... and it just
won't go!

The guy who maintains the Hams on Internet FAQ? I tried 3 times to Email
him to say thanks..he's doing a good job... and each time

CAN'T MAIL! MAIL RETURNED! ... I had to give up on the guy!

So, either we gobble up bandwidth by posting, or ignor all the Ham packets.

I'll go either way!

--
Randy KA1UNW              If you get a shock while
                         servicing  your  equipment,         "Works for me!"
randy@192.153.4.200             DON'T  JUMP!                     -Peter Keyes
                     You might break an expensive tube!

------------------------------

Date: Sun, 19 Dec 1993 07:26:56 GMT
From: netcomsv!netcom.com![e-mail]
Subject: Order Pizza by Internet
To: [e-mail]

[e-mail] (Randy) wrote:

>NOW..we have the problem of Internet traffic connecting up to Ham air...
>Many amp.org sites and others, will reject any I-net mail being sent to a
>Ham thats getting his/her mail via Packet..... because I-net is viewed as
>'commercial traffic' !

I don't think the commercial aspect of it is what's important.

[...]

>Hey! wait a minute! There are ticketed Hams here! Whats going on?

Let's say I send clearly commercial mail from my Internet account to you on
your packet account.  Who has violated a rule?  Maybe me, but certainly the
gateway operator.  Why should gateways take that risk, or take the time to
read every message that goes through?

[...]

>So...somewhere, someone has to make clear what traffic is to pass, make it
>uniform everywhere, so that everyone can set up accordingly to jive with the
>system...which ever it's going to be:

"has to"?  Who says?

[...]

>* obviously, the sent-text would have to be as per the rules about by & for
>  Amateur perposes only

And that's the problem.  Gateway operators don't know.  It's not clear, I
think, whether I would have violated FCC rules if I sent you an illegal
message originated in the Internet.  What if I thought it was going to an
Internet account but you had set up an auto-forward file to packet?  What
if a non-ham sent such a message?  They don't have a license with terms to
violate.

--

----------------------------------------------------
Jack Hamilton            POB 281107 SF CA 94128  USA
[e-mail]           kd6ttl@w6pw.#nocal.ca.us.na

------------------------------

Date: 21 Dec 93 02:14:00 GMT
From: ogicse!uwm.edu!cs.utexas.edu!swrinde!sdd.hp.com!col.hp.com![e-mail]
Subject: Portable Repeater Help
To: [e-mail]

Milt Sanders ([e-mail]) wrote:
: Don't know if I am off base or not, but with all the frequency coordination
: required in many, many populated areas for multiple repeaters,  would not a
: "PORTABLE REPEATER" create lots of havoc and interference in built-up
: areas?  Hope you plan to use this in a very large desert.  Some repeaters
: have very long ranges:  our .62 repeater covers well over 100 miles north,
: west, and south on 50 watts.

  Depends, I guess. In Colorado, the freq coordinator has seen fit to
  set aside a few frequency pairs for Special Event or Emergency
  repeaters. Thus, some public service minded people keep portable
  repeaters crystalled up on those pairs.

Bob Witte / HP PMO (Colo Springs) / [e-mail] / KB0CY / [phone]

------------------------------

Date: 21 Dec 93 02:38:28 GMT
From: ogicse!emory!kd4nc!ke4zv![e-mail]
Subject: Portable Repeater Help
To: [e-mail]

In article <[e-mail]> [e-mail] (Milt Sanders) writes:
>In article <[e-mail]>, Rick Aldom
><[e-mail]> wrote:
>.......  We allowed
>> our imagination to run some and thought having a portable repeater might
>> be over some use...........
>
>Don't know if I am off base or not, but with all the frequency coordination
>required in many, many populated areas for multiple repeaters,  would not a
>"PORTABLE REPEATER" create lots of havoc and interference in built-up
>areas?  Hope you plan to use this in a very large desert.  Some repeaters
>have very long ranges:  our .62 repeater covers well over 100 miles north,
>west, and south on 50 watts.
>
>Please take note to coordinate and use the minimum power required.  Don't
>know if I misunderstood, but felt I needed to comment.

I have a briefcase repeater that I carry with me for boonie ad hoc
repeater use and for use at hamfests. The trick to cause the minimum
of disruption is to use low power, mine's 2 watts, and use CTCSS access.
The biggest no-no is to operate inverted from the bandplan. This can
cause real trouble. In most of the country, a UHF portable repeater like
this can be a big help at outdoor events while causing almost no problem.
However, sometimes there's a local machine on the same pair and you can't
use your toy. That's OK, just use the big machine. My portable is on
the same pair as my big machine, so when I use it locally I can only
jam myself. :-) It turns out to be useful inside some of the big
convention center halls where hamfests are held, and where the big
machine doesn't penetrate too well for handheld users. It's also
useful outside in some of the main repeater's coverage holes.

Getting coordination for a portable repeater is impossible. But do
use the repeater directories, and *listen* before activating a portable.
That in essence is doing your own coordination. If you're upright on
the same pair with a distant machine, you won't cause much, if any,
trouble to it's regular users as long as your repeater is CTCSS, uses
low power, and *your* users do the same. The biggest problem will be
your users triggering the distant machine, if it's carrier operated
and a bunny rabbit (all ears). The secondary problem may be your
machine's output covering the distant machine for some ham near you
trying to repeater DX. You should be alert to these situations and
be ready to shutdown at a moment's notice if problems arise.

To Rick, my portable is a conventional repeater with duplexer, in a
Zero Haliburton case with a gell cell, but that may not be the best
solution for outdoor use. An alternative is to use two frequency agile
radios (a pair of older HTs would be fine), a controller, and separate
antennas. With decent spacing, vertical separation preferred, you can
have a system you can plop down on any locally vacant pair by just turning
a couple of knobs. Retuning a duplexer in the field isn't fun, but a couple
of notch cavities can be whipped on frequency fairly easily, and will ease
the antenna separation requirements.  Low power eases the desense problem
too. Using ammo cans to house the radios is a good idea, one radio to a can.
That gives the extra shielding you're likely to need.

Gary
--
Gary Coffman KE4ZV          | I kill you,             | gatech!wa4mei!ke4zv!gary
Destructive Testing Systems | You kill me,            | uunet!rsiatl!ke4zv!gary
534 Shannon Way             | We're the Manson Family | emory!kd4nc!ke4zv!gary
Lawrenceville, GA 30244     |         -sorry Barney   |

------------------------------

Date: Mon, 20 Dec 93 00:12:58 GMT
From: sdd.hp.com!elroy.jpl.nasa.gov!usc!howland.reston.ans.net!newsserver.jvnc.net!a3bee2.radnet.com!cyphyn![e-mail]
Subject: Reference for xmit tubes?
To: [e-mail]

Bruno Bienenfeld ([e-mail]) wrote:
: ufficient info can be found in old  ARRL handbooks. Otherwise if you need
: graph data and specs write to Eimac and thay will send you copy of tube
: caracteristics.
:
: from the log of AA6AD

Also, I'm setting up at this site, to supply tube spec info...

finger me for  details.


--
Randy KA1UNW              If you get a shock while
                         servicing  your  equipment,         "Works for me!"
randy@192.153.4.200             DON'T  JUMP!                     -Peter Keyes
                     You might break an expensive tube!

------------------------------

Date: Sat, 18 Dec 1993 22:46:20 -0500
From: Mail Delivery Subsystem <[e-mail]>
Subject: Returned mail: User unknown
To: randy@cyphyn

   ----- Transcript of session follows -----
While talking to trlluna.trl.OZ.AU:
>>> RCPT To:<[e-mail]>
<<< 550 <[e-mail]>... User unknown
550 <[e-mail]>... User unknown

   ----- Unsent message follows -----
Received: from a3bee2.radnet.com by tigger.jvnc.net with SMTP id AA14236
  (5.65c/IDA-1.4.4 for [e-mail]); Sat, 18 Dec 1993 22:46:20 -0500
Received: from cyphyn.radnet.com by a3bee2.radnet.com (5.65/SMI-4.1-Interactive)
 id AA29886; Sat, 18 Dec 93 22:39:36 -0500
Received: by cyphyn.radnet.com (Smail3.1.28.1 #5)
 id m0pBEzn-0000OeC; Sat, 18 Dec 93 22:39 EST
Message-Id: <[e-mail]>
Date: Sat, 18 Dec 93 22:39 EST
From: [e-mail] (Randy)
To: [e-mail] (Drew Diamond)
Subject: Re: Where are all the young enthusiasts?
Newsgroups: rec.radio.amateur.misc
Organization: Evil Weather Machines LTD


It was those mostly grey and balding men, whose voices I heard on MY home
made short wave radio, that inspired me to be one of those voices myself...
errr...TRY to be one of those voices.

Yes, there is a lack of intrest, in home making anything...less reason maybe.
In order for a radio to be compatible to everyone elses, it has to be SO
high-tech, that one can't just go whip up a 1 tube rig and expect a whole lot.

Well....almost.....

Theres  a very small bunch of us who still dabble with older technology, and
we stay in contact (now) via this Internet.
I have several 1 tube transmitters (all out on loan to those who can't get
over such a thing ) of home made construction....and there are two young guys
who almost live here,now, who are making 1 and 2 tube rigs...one has a 3 tube
receiver we put together out of salvaged parts.
(you should have seen the look on his face when 1st turned on and he tuned in
on someone calling CQ)

Yah...things have changed.... but theres a few of of preserving the past still.

Its not gone....just well hidden under the noise   :)



--
Randy KA1UNW              If you get a shock while
                         servicing  your  equipment,         "Works for me!"
randy@192.153.4.200             DON'T  JUMP!                     -Peter Keyes
                     You might break an expensive tube!

------------------------------

Date: Sun, 19 Dec 93 23:58:24 GMT
From: sdd.hp.com!sgiblab!swrinde!gatech!howland.reston.ans.net!newsserver.jvnc.net!a3bee2.radnet.com!cyphyn![e-mail]
Subject: Where are all the young enthusiasts?
To: [e-mail]

Yer mail box is roasted, so I'll give it to you here...sorry!

------------------------------

Date: Mon, 20 Dec 1993 15:37:17 GMT
From: pacbell.com!sgiblab!swrinde!cs.utexas.edu!howland.reston.ans.net!pipex!sunic!news.funet.fi!news.cs.tut.fi![e-mail]
To: [e-mail]

References <[e-mail]>, <[e-mail]>, <[e-mail]>t.fi
Subject : Re: Optimum call sign for CW/contests?

Maybe this is not exactly what you are meaning, but in international contests
one powerfull callsign can be(from Ivory Coast, of course):
                            TU5NN  :) :)

--
** Jukka Salonen OH3NLP * E-mail: [e-mail] *****************************
** Addr: Sorva **************************************************************
******** 37120 Nokia ********* Too old to Rock and Roll, too young to die.***
******** Finland ************************************************************

------------------------------

Date: 20 Dec 93 14:39:44 GMT
From: agate!howland.reston.ans.net!gatech!swrinde!cs.utexas.edu!convex!convex.com![e-mail]
To: [e-mail]

References <2eoare$[e-mail]>, <[e-mail]>, <[e-mail]>
Subject : Re: R/C Aircraft

>> Bear in mind, when you think about flying it anywhere, that you have
>> a liability problem. You can't fly R/C, and be insured, except at an
>> AMA sanctioned field. That means no coverage of news events. Your
>> altitude is also limited by FAA regs, so you can't foul up air
>> traffic. By the way, people have been sued for millions after their
>> airplane whacked someone, so this is not trivial matter.

What if someone used a modified HT to transmit on the R/C frequency and
jam the sucker until it crashed.  Then who would be liable?  I've seen
people use Radio Shack CBs to jam those 27 MHz R/C cars.  Knocks 'em
dead from a long ways off!  Of course, I wouldn't ever do anything like
this myself but can you imagine the look on the guys face when his $$$$
plane flys off into the sunset....or into the ground?  :'/

David

------------------------------

Date: Mon, 20 Dec 1993 14:13:50 GMT
From: pacbell.com!sgiblab!swrinde!emory!kd4nc!ke4zv![e-mail]
To: [e-mail]

References <2er28k$[e-mail]>, <[e-mail]>, <2f24oe$[e-mail]>
Reply-To : [e-mail] (Gary Coffman)
Subject : Re: Kraco SSB CB Information Please

In article <2f24oe$[e-mail]> [e-mail] (Steve "daffy" Hunt) writes:
>Tom Bodoh ([e-mail]) wrote:
>: In article <2er28k$[e-mail]>, [e-mail] (John Russell Woodman) writes:
>: |> Could someone tell me
>: |> how to peak this radio up so I can get maximum output on it?  If possible,
>: |> please supply information on peaking tx power, tx modulation and rx sens-
>: |> itivity.  Any information on how to get this radio to perform to optimum
>: |> capacity would be appreciated.  Please respond in mail rather than posting.
>: Posting this here is like walking into a cop bar and asking directions to
>: the local crack house...
>
>"Peaking" is a perfectly normal procedure.  Any reputable repairman
>will do it for a small fee, or perhaps for nothing if you are having a
>repair done at the same time.

Perfectly true Steve, but under US rules the work has to be done
by a licensed technician, not by the CBer. So asking for instructions
on how to make internal adjustments at home is where the problem arises.
Now in the perspective of the general lawlessness of CB, this is really
a reasonable request, but it got crossposted to the amateur group, and
that was inviting flames from the armchair lawyers. In truth, most
amateurs couldn't do this job properly to FCC specs because it requires
test equipment most of them don't have. Expecting a CBer to both have
the skills, and the test equipment, is a bit much. To do the job right,
you need a calibrated service monitor and a spectrum analyzer.

Gary
--
Gary Coffman KE4ZV          | I kill you,             | gatech!wa4mei!ke4zv!gary
Destructive Testing Systems | You kill me,            | uunet!rsiatl!ke4zv!gary
534 Shannon Way             | We're the Manson Family | emory!kd4nc!ke4zv!gary
Lawrenceville, GA 30244     |         -sorry Barney   |

------------------------------

End of Info-Hams Digest V93 #1487
******************************
******************************